12 AWG 30 C VNTC TRAY CABLE

Tray Cable UL Type TC / TC-ER – 600V 12 AWG THHN/THWN-2 Insulation – PVC Jacket

DESCRIPTION

Tray Cable UL Type TC / TC-ER – 600V 12 AWG THHN/THWN-2 Insulation – PVC Jacket

APPLICATION

Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger wire in open air, raceways, channels, conduits and ducts. Approved for direct burial and outdoors in cable trays where sunlight resistant is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils. Available as Exposed Run (ER) for use between cable trays and utilization equipment, and Joist Pull (JP) applications in accordance with NEC 336.10 (7).

PART NUMBER

12-30TC-VN

STANDARDS

• UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors • UL Listed as TC-ER-JP (Joist Pull) and used in accordance with NEC • Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC • Rated 90°C wet or dry to meet UL 83 for THHN/THWN-2 • Meets cold bend test at -25°C • ICEA S-95-658, ICEA S-73-532 • UL 62, UL 66, UL 83, UL1277 • UL1685 and IEEE 383 70,000 BTU Vertical Flame Test • UL Listed to IEEE1202 and CSA FT4 70,000 BTU Flame Test

JACKET COLOR

BLACK

JACKET

Flame and sunlight resistant black PVC rated 90°C wet or dry per UL 1277. Ripcord provided for jackets with thickness of 60 mils or less.

CONDUCTORS

Fully annealed bare copper Class B compressed strand per ASTM B-3 and ASTM B-8

COLOR CODE

ICEA Method 1, Table E-2 (other color code options available)

INSULATION

Flame retardant PVC/NYLON that is heat and moisture resistant per UL 62. Insulation meets requirements of Type THHN/THWN-2 as specified by UL 83

SHIELD

UNSHIELDED

ASSEMBLY

Conductors are cabled together with or without fillers as required to form a round, compact cable core with a binder tape as needed

CONDUCTOR SIZE (AWG)

12

NO. OF CONDUCTORS

30

NO. OF STRANDS

7

ISULATION THICKNESS (INCHES)

0.015

INSULATION THICKNESS (MM)

0.38

NYLON THICKNESS (INCHES

0.004

NYLON THICKNESS (MM)

0.1

JACKET THICKNESS (INCHES)

0.08

JACKET THICKNESS (MM)

2.03

OVERAL DIAMTER (INCHES)

1.03

NEW WEIGHT)

910

Premium Wire & Cable Materials for Longevity & Durability

Premium Wire & Cable Materials for Longevity & Durability

Get the products you can trust: Tested & Certified.